Bipolar ST Series intelligent Driver(MSST5/10-Q)

intelligent Driver *Strong protection *Over voltage

Description of intelligent Driver 

Features

1.Brand-new technology

 Advanced current control Microstep emulation to provide smooth motion even with low stepresolutions Anti-resonance algorithm to eliminate the mid-range instability Torque ripple smoothing algorithm to adjust waveform to reducelow speed torque ripple Command signal dynamic smoothing algorithm to make the motion ofthe motor less jerky

2.Multiple operating modes, which can be changed on thefle from a host command or within a Q program.

 Step&Direction CW/CCW Encoder following Analog velocity or digital velocityAnalog positioning- SCL "Host" commands for real time control from a host PC or PLC using RS232  or serial RS-485 communicationStand alone

3.Multi-axis Mis programming ifused with MisNetHub

4.Optional communicationRS232/RS485.

5.Optional encoder feedback for stall prevention and position maintenance

6.Provide complex motion and machine control with Q programs

7.Software selectable microstep resolutions from 200 to 51200 steps/rev. in 200 increments

8.Power supply:

External 24-48VDC (MSST5)/24-80VDC(MSST10)

9.Sortware selectable motor current 0.2-5/0.2-10 amps/phase in 0.01 amp increments

10 Self test and auto setup to measure motor parameters and optimize the system performance automatically

11.Automatic idle current reduction from 0 to 100% of full current after delay selectable in milliseconds

12.Inputs & Outputs

Two ±10V/±5V/0-5V/0-10V analog inputTwo 5V high-speed digital inputsSix 12-24V digital inputFour 30V@100mA(max.) optical isolated digital outputs

13.Strong protection: Over voltage,Under voltage, Over temp and Over current.

14.Compact size

15.Suitable to drive 4, 6, 8 lead size 24 or 34 step motors

16.CE compliant

Bipolar ST Series intelligent Driver(MSST5/10-Q)