two axes MOTION CONTROL CARD-JMC2410

two axes MOTION CONTROL CARD 1.Support linear interpolation btween 2 axes; 2.Support encoder input

Description of two axes MOTION CONTROL CARD:

The JMC2410 is a 4 axes motion control card with PCI interface.  It can control stepping motor and receive pulse directive.

JMC-2410 uses one ASIC chip to support linear interpolation of hardware, parameter counting,acceleration/deceleration and multi-axes linear interpolation. It can reduce the load of computer system.  The process of getting the signal is completed by the hardware with a high speed. It supports position compare function.  When meet the compare condition, it will create compare output signal and cause interrupt.

JMC-2410 can receive the encoder signal, and support the position latch function.  When the latch signal is sent, the current position of encoder is gotten and can will cause interrupt.

JMC-2410 provide the board number setting function,when the user set the board number, the serial number of the 4 axes is determinate.  This will avoid the BIOS search control card automatically and will not meet the problem of setting number again when PCI interface is not connected well.

MotionPannel program can support the user to debug the motion control system; besides, we also provide the DELL Dynamic Linkable Library to let the user do the second development.  The user can do the motion control development by C/C++,Visual Basic.

1. 32-bit PCI-Bus, support 3.3V and 5V;

2. 4 axes of step and direction pulse output for controlling stepping or servomotor;

3. Maximum output frequency of 5 M pps, support T type and S type velocity curve acceleration  and deceleration of the speed;

4.Change the speed on the fly

5. 28-bit up/down counter, counting range:-134,217,728 to +134,217,727;

6. Built-in position comparator, and support output compare

7. Support interrupt function

8. Support position latch

9. Support linear interpolation btween 2 axes;

10.Support encoder input

11. I/O interface for limit switch, origin switch, index signal,INP,ERC,ALM

12. Support handwheel input

13. Support the setting of board numberm, The same software supports maximum up to 16 JMC-1000 cards operation;

14. 20-channel open collector, non Isolation Digital Signal output(DO);

15. 20-channel isolation Digital Signal Input(DI);

16. 32MHz 3/5.0V PCI interface;

17. 68 pin SCSI II interface.

 

 

Software support:

1.OS support Windows2000,Windows XP, and window XPE;

2.DLL Dynamic Linkable Library can be used in second development;

3.MotionPannel can be used in debugging motion control system;

4.Support C/C ++, Visual Basic to proceed the development of motion control program, and  provide the routine.

 

Application

 

1.semiconductor production equipment

2. SMT related production equipment

3.LCD related production equipment

4.Laser production equipment

5.Visual and automatic test equipment

6.Bio-medical automatic test equipment

7. Robotic

8. CNC (Computerized Numerical Control) equipment

two axes MOTION CONTROL CARD-JMC2410